Home Page Predictive Maintenance Since 1986 Contact Us
Vibration Monitoring Alignment Shims
Infrared Imaging Balancing Weights
MAINTelligence Strobes & Tachometers
Accelerometers Training
Laser Alignment Accessories
Ultrasonic Detection PdM Services
Accessories Header Request For Quote

Select Type of Accelerometers
Dry, General Industrial
Severe Chemical Presence
Moderate Chemical Presence
Underwater, Immersion
Moderate Watersplash
Intrinsically Safe
High Temperature
<350F,176C, ICP Type
High Temperature
<5000F,260C, Charge Type
High Temperature
<9000F,482C, Charge Type

Vibra-Metrics designs and manufactures vibration sensing products including world class accelerometers (vibration sensors), accelerometer power supplies, accelerometer switch boxes, online Condition Based Management Systems, and accelerometer accessories.


Intrinsically Safe

4000 Series

The 4000 Series of EEPE (External Electronic Piezo-Electric) accelerometers are designed with external circuitry to be used in elevated temperature environments where standard IEPE or ICP accelerometers will not function. The model 4300 features an integral hardline cable, a square 4-hole mounting base, and FM approval, suitable for operation to 550¡F (288¡C).

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
4300 *Hz-5kHz 550¡F(288¡C) 20-25 pC/g 500g Hermetic 3-pin FM Approved

1100 Series

Low profile design, thermal boot and watertight construction make these sensors perfect for moderate to harsh applications. All models include a 1/4-28 removable mounting stud to facilitate installation.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
1136FM 3Hz-3kHz 200¡F(93¡C) 100 mV/g 70 g Side Exit, Pigtail FM Approved

8002 Guardian Series

The 8002 features an external frequency range, up to 300,000 CPM, capable of capturing all bearing and gear defects, excellent signal-to-noise ratio, plus isolated symmetrical shear mode sensing. All 8002 models include our patented TUFKEM integral cable assemblies for superior water and chemical resistance. A 10-32 captive center throughbolt simplifies mounting. The 8002 sensor line is covered by our Lifetime Partnership Warranty.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
8002CFM 5Hz-5kHz 300¡F(150¡C) 100 mV/g 50g peak BNC or Pigtail FM Approved

6036 Series

The premium model 6036 is suitable for production critical equipment, where high performance is required.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
6036FM 3Hz-5kHz 250¡F(121¡C) 100 mV/g 50g peak 2 Pin MIL FM Approved

 

1100 Series

Low profile design, thermal boot and watertight construction make these sensors perfect for moderate to harsh applications. All models include a 1/4-28 removable mounting stud to facilitate installation.

Series Freq. 5% Max. Temp. Sensitivity Amplitude Connector Comments
1136 3Hz-3kHz 200¡F(93¡C) 100 mV/g 70 g Side Exit, Pigtail Rated for Underwater use to 100 foot depth.
1136T 3Hz-3kHz 200¡F(93¡C) 100 mV/g 70 g Top Exit, Pigtail Rated for Underwater use to 100 foot depth.
1136FM 3Hz-3kHz 200¡F(93¡C) 100 mV/g 70 g Side Exit, Pigtail FM Approved
1136TFM 3Hz-3kHz 200¡F(93¡C) 100 mV/g 70 g Top Exit, Pigtail FM Approved
Vibration Monitoring
Infrared Imaging
MAINTelligence
Accelerometers
Laser Alignment
Ultrasonic Detection
Balancing Weights & Alignment Shims
Strobes & tachometers
Training
Accessories
PdM Services

Vibration Monitoring | Infrared Imaging | Grease Analysis | Accelerometers | Laser Alignment | Ultrasonic Detection | Training | Accessories

J L Griffin LLC. ~ E-mail jim@jlgriffin.com ~ 4625-B Turtle Creek Drive, Brookfield, WI 53005 ~ TEL 414.218.8088