Home Page Predictive Maintenance Since 1986 Contact Us
Vibration Monitoring Alignment Shims
Infrared Imaging Balancing Weights
MAINTelligence Strobes & Tachometers
Accelerometers Training
Laser Alignment Accessories
Ultrasonic Detection PdM Services
Accessories Header Request For Quote


Select Type of Accelerometers
Low Cost
General Purpose
Low Frequency
High Frequency
High Temperature
Multi-Axis
Velocity Output Sensor
Temperature Output
Intrinsically Safe Sensor
4-20 mA Sensor

IMI manufactures industrial accelerometers, vibration sensors, 4-20 mA transmitters, and related accessories for predictive maintenance, condition monitoring, and machinery vibration analysis. The instrumentation is used to monitor bearings, gears, motors, spindles, and other rotating machinery in harsh factory environments. A division of PCB Piezotronics, Inc., all IMI products are designed and manufactured in our ISO 9001 certified facility in the U.S.A. Products include 24-hour telephone support and are backed by a Total Customer Satisfaction Guarantee.



Series 608A11
Small size, ceramic shear, top exit integral cable
9/16 inch footprint
100 mV/g sensitivity
75µg resolution
24 to 480k cpm (0.4 to 8000 Hz) frequency range [±3 dB]
Single point NIST traceable calibration at 6000 cpm (100 Hz)
Choice of three standard integral cable lengths
Ideal for permanent installations
Series 607A11 SwivelerTM
Swivel mount with floating hex and 360¡ cable orientation
Low profile (less than 1 inch) and small footprint (9/16 inch)
100 mV/g sensitivity
300µg resolution
26 to 600k cpm (0.43 to 10k Hz) frequency range [±3 dB]
Single point NIST traceable calibration at 100 Hz
10 ft, integral cable with choice of alternative cable lengths
Ideal for use on small, high speed machinery
Series 607A61 SpindlerTM
Swivel mount with floating hex and 360¡ cable orientation
Low profile (1 inch) and small footprint (9/16 inch)
100 mV/g sensitivity
300 mg resolution
26 to 600 k cpm (0.43 to 10k Hz) frequency range [±3 dB]
Single pint NIST traceable calibration at 100Hz
10 ft, integral armored jacketed cable
Ideal for use on high-speed, rotating machinery and spindle bearings
Series 601Ax1
Low-noise, ceramic shear, top connection
High resolution
100 mV/g sensitivity
50µg resolution
16 to 600k cpm (0.27 to 10k Hz) frequency range [±3 dB]
Single point NIST traceable calibration at 6000 cpm (100 Hz)
2-pin or 3-pin connector, terminal block, and three integral cable styles
Ideal for permanent installations
Series 601Ax2
Low-noise, ceramic shear, top connection
High resolution
500 mV/g sensitivity
100µg resolution
10 to 600k cpm (0.17 to 10k Hz) frequency range [±3 dB]
Single point NIST traceable calibration at 6000 cpm (100 Hz)
2-pin or 3-pin connector,terminal block, and three integral cable styles
Ideal for permanent installations
Series 602Cx1
Teardrop, ceramic shear, side connection
High resolution
100 mV/g sensitivity
50µg resolution
16 to 480k cpm (0.27 to 8k Hz) frequency range [±3 dB]
Single point NIST traceable calibration at 6000 cpm (100 Hz)
2-pin or 3-pin connector and three integral cable styles
Ideal for permanent installations
Series 602Ax2
Low-noise, ceramic shear, side connection
High resolution
500 mV/g sensitivity
30µg resolution
10 to 480k cpm (0.17 to 8k Hz) frequency range [±3 dB]
Single point NIST traceable calibration at 6000 cpm (100 Hz)
2-pin or 3-pin connector and three integral cable styles
Ideal for permanent installations
Series 603Cx1
Low-noise, ceramic shear, top connection
High frequency
100 mV/g sensitivity
75µg resolution
26 to 780k cpm (0.43 to 13k Hz) frequency range [±3 dB]
Single point NIST traceable calibration at 6000 cpm (100 Hz)
2-pin or 3-pin connector and three integral cable styles
Ideal for permanent installations
Series 627Ax1
Quartz shear, top connection
Stable performance
100 mV/g sensitivity
1000µg resolution
20 to 600k cpm (0.33 to 10k Hz) frequency range [±3 dB]
Single point NIST traceable calibration at 6000 cpm (100 Hz)
2-pin or 3-pin connector, terminal block, and three integral cable styles
Ideal for permanent installations
Series 606Bx1
Ring shaped, ceramic shear, side connection
High resolution
100 mV/g sensitivity
75µg resolution
26 to 600k cpm (0.43 to 10k Hz) frequency range [±3 dB]
Single point NIST traceable calibration at 6000 cpm (100 Hz)
2-pin or 3-pin connector and three integral cable styles
Ideal for permanent installations

 

Vibration Monitoring
Infrared Imaging
MAINTelligence
Accelerometers
Laser Alignment
Ultrasonic Detection
Balancing Weights & Alignment Shims
Strobes & tachometers
Training
Accessories
PdM Services

Vibration Monitoring | Infrared Imaging | Grease Analysis | Accelerometers | Laser Alignment | Ultrasonic Detection | Training | Accessories

J L Griffin LLC. ~ E-mail jim@jlgriffin.com ~ 4625-B Turtle Creek Drive, Brookfield, WI 53005 ~ TEL 414.218.8088