PPLT200 Pocket Laser Tach - Strobes & Tachometers- J L Griffin LLC

Portable Tachometers
PPLT200 Pocket Laser Tach

Pocket Laser Tach 200 (PLT200) PLT200 is a digital, battery-powered portable optical tachometer, which operates up to 25 feet* from a reflective target using a laser light source. The ergonomic design allows safe, direct line-of-sight viewing of both the target and the display at the same time, while providing a non-slip rubber surface for single hand operation.

Multi-Function PLT200 is a 32 function Tachometer/Ratemeter, Totalizer/Counter and Timer (stopwatch), which is programmable in both English and Metric linear rates. Support is built-in for both our optional Remote Contact Assembly (RCA) and our Remote Sensors. PLT200 has a TTL compatible Pulse Output to trigger devices like data collectors or stroboscopes. The KIT is supplied complete with a Remote Contact Assembly including concave and convex tips and a 10 cm linear speed wheel and a 5 foot roll of reflective tape all in a latching carrying case. * performance subject to intensity of ambient light irradiation.

Features

All Pocket Tach Series instruments provide a unique ergonomic design which allows you to safely observe both the display and the rotating target at the same time.

Operating Range up to 25 feet* (Class 2 visible laser)

Accepts Remote Contact Assembly (optional)

Accepts Remote Sensors (optional)

TTL Pulse Output with 6 foot BNC Cable

Auto Ranging/Fixed Decimal (user selectable)

English and Metric Rates

Tripod Mounting Bushing

On-Target and Low Battery Indicators

Rugged Rubberized Housing

N.I.S.T. traceable Certificate of Calibration included

ACT-1B Specifications

Speed Range:	5 to 99,999 RPM
Accuracy:	±1 RPM or 0.005% of reading
Resolution:	1 RPM
Display:	5 digit, 0.56” (14 mm) high red LED.
Display Update:	Twice per second above 120 RPM. Programmable with PM Remote Software and USB programming cable.
Dimensions:	1/8 DIN by 4.5” (114 mm) deep. Panel cutout: 3.58” x 1.74” (91 x 44mm)
Input Power:	Standard: 100 - 240 Vac ±10%, 50/60 Hz Optional: 12 or 24 Vdc ±10%, Isolated, 6.0 Watts.
Inputs:	Universal input for optical, proximity, two wire or three wire magnetic, infrared or laser sensors. TTL input or 1.5 Vac to 50 Vac input. Standard input is 1 pulse per revolution.
Sensor Excitation:	5Vdc or optional 12Vdc or 24Vdc to sensor.
Recommended Sensors:	Optical - Monarch ROS-W, ROS-P-25, ROS-HT-W-25, ROSM-5W Proximity - Monarch P5-11 Magnetic - Monarch M-190W or MT-190W Infrared - Monarch IRS-W Laser - Monarch ROLS-W, SLS-115/230 Inductive - Gas Engine GE-200
Analog Output: (Optional)	VOLTAGE (AO): 0 to 5 Vdc out, 5 mA 16 bit resolution. Full scale RPM settings as specified when ordered or programmable using PM Remote Software and USB programming cable. or CURRENT (IO): 4 to 20 mA out, 16 bit resolution 12Vdc compliance voltage. Full scale RPM settings as specified when ordered or programmable using PM Remote Software and USB programming cable.
Pulse Output: (Optional)	0 to 5 V TTL pulse, non-inverting, one pulse out for each pulse in. Positive or negative out. Programmable using PM Remote Software and USB programming cable.
Remote Programming:	Unit can be remotely programmed using optional communications interface cable and PM Remote Software.
Environmental:	Indoor use only, Installation category II per IEC 664 Temperature: -10°C to 50°C operating per IEC 61010-1 Humidity: Maximum relative humidity 80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C.
Electrical Safety:	Meets EN61010-1:2001, EC low voltage directive 72/23/EEC and 89/336/EEC

ACT-3X Specifications

Speed Range:	5 to 999,990 RPM (single pulse per revolution), 0.5 to 999,990 RPM (10 pulses per revolution). Speeds below 5 RPM are possible with multiple pulses per revolution
Input Frequency Range:	0.083 Hz to 250 kHz
Totalizer/Counter:	Display Range: 0.001 to 99,999 (Only top 5 digits are shown for 100,000-999,990) Max # of counts = 16,777,216 even with 0.001 scale
Input Configuration:	Universal Inputs: 1 to 9,999 pulses per revolution, front panel push button programmable TTL input and 1.1V to 50vac signals, Opt: -1 to – 50Vdc
Accuracy:	±0.001% of reading or ±1 displayed resolution (Standard Gate), ±0.01% of reading or ±1 displayed resolution (Fast Gate).
Resolution:	Up to 0.001 RPM, 10 RPM (100,000 to 999,990 RPM).
Display:	5 digit, 0.56” (14 mm) high red LED.
Display Update:	Menu Selectable between: 0.5 second above 120 RPM, 1 second above 60 RPM and 1.5 seconds above 40 RPM.
Max Measurement Rate:	Up to 100 times per second (Standard Gate) or up to 1000 (Fast Gate) dependent on input frequency. Input must be > measurement rate.
Scaling:	Programmable scaling: 0.0001 to 9999.9 (front panel push button programmable).
Decimal Point:	User Selectable (0-3) decimal places max (front panel push button programmable).
Memory:	Maximum, minimum and last reading recall from front panel push buttons.
Dimensions:	1/8 DIN by 4.5” (114 mm) deep. Panel cutout: 3.58” x 1.74” (91 x 44mm)
Input Power:	Standard: 100 - 240 Vac ±10%, 50/60 Hz Optional: 12 or 24 Vdc ±20%, Isolated, 6.0 Watts.
Inputs:	Universal input for optical, proximity, two wire or three wire magnetic, infrared or laser sensors. TTL input or 1.5 Vac to 50 Vac input. Standard input is 1 pulse per revolution.
Sensor Excitation:	5Vdc or optional 12Vdc or 24Vdc to sensor.
Recommended Sensors:	Optical - Monarch ROS-W, ROS-P-25, ROS-HT-W-25, ROSM-5W Proximity - Monarch P5-11 Magnetic - Monarch M-190W or MT-190W Infrared - Monarch IRS-W Laser - Monarch ROLS-W, SLS-115/230 Inductive - Gas Engine GE-200
Pulse Repeater Output:	Standard, 0 to 5 V TTL compatible. One pulse out for each pulse in. Menu selectable polarity.
Communications:	Bi-directional RS232C, USB or Ethernet interface.
Analog Output:	Voltage (AO): 0 to 5 Vdc, 5mA max load (isoloated or non-isolated) or Current (IO): 4 to 20mA, 500Ω max load. (isolated or non-isolated), 1 to 5Vdc possible using 250Ω resistor) 16 bit resolution. Front panel push button programmable for full scale and offset RPM ranges.
Alarm Capability:	Two alarm set points: High or Low alarm limits, Latching or Non-Latching, Front panel push button programmable Hysteresis, dead band and low limit lockout are programmable, Relays can be set as failsafe. Alarms can be reset Manually or Automatically. Remote reset via auxiliary input.
Alarm Outputs:	Two Form C relay contacts, rated 1A at 115Vac or 230Vac
Remote Programming:	Unit can be remotely programmed using optional communications interface and PM Remote Software.
Environmental:	Indoor use only, Installation category II per IEC 664 Temperature: -10°C to 50°C operating per IEC 61010-1 Humidity: Maximum relative humidity 80% for temperatures up to 31°C, decreasing linearly to 50% relative humidity at 40°C.
Electrical Safety:	Meets EN61010-1:2001, EC low voltage directive 72/23/EEC and 89/336/EEC

Accessories

Please call 414-218.8088 to order accessories listed below.

Item No.	Model	Description	Price
U6180-031	USB Programming Cable and PM Remote Software	3 ft. USB Programming Cable and Windows compatible PM Remote software package. Allows user configuration of operation mode, analog output scaling, decimal places, display update rate and input pulses per revolution. View real time data in digital format and/or through Microsoft Excel. ++++++Required for ACT-1B, Optional for ACT-3X with 3.5mm phone plug communication port++++++	$99.00
1065-2022-001	4633	3-wire shielded Sensor Cable, bulk lengths - Specify total length	CALL
6180-070	T-5	Reflective Tape - 5 foot roll, 0.5 inch wide	$13.00
6180-079	T-5WP	Waterproof Reflective Tape (honeycomb pattern) - 5 foot roll, 1 inch wide	$16.00
6180-CAL	CAL-N.I.S.T.	N.I.S.T. Traceable Certificate of Calibration / Re-Calibration (Included with purchase of ACT-3X)	$95.00

Ordering Information
Please call 414-218.8088 to place an order

ACT-1B Tachometer
$249.00 standard model. Options are listed below

Power Option:	AC Input Power (incl.)	12Vdc Input Power (Add $70.00)	24Vdc Input Power (Add $75.00)
Sensor Power Option:	12Vdc Option or 5Vdc Option (incl.)	24Vdc Option (Add $25.00)

Pulse Output Option:

(Add $25.00)

Analog Output Option:

0-5Vdc Option
(Add $55.00)

4-20mA Option
(Add $60.00)

0-5Vdc Isolated Option
(Add $100.00)

4-20mA Isolated Option
(Add $105.00)

ACT-3X Panel Tachometer
$299.00 standard model. Options are listed below

Power: AC Input Power (incl.) 12Vdc Input Power (Add $70.00) 24Vdc Input Power (Add $75.00)

Sensor Power: 12Vdc Option or 5Vdc Option (incl.) 24Vdc Option (Add $25.00)

Output: 0-5Vdc Non-Isolated Output (Add $55.00) 4-20mA Non-Isolated Output (Add $60.00) 0-5Vdc Isolated Output (Add $100.00) 4-20mA Output (Add $105.00)

Communications: Phone Plug (3.5mm)Connector Requires Purchase of USB Programming Cable and PM Remote Software RS232 Bi-Directional Serial with 9 PIN Connector (Add $30.00) USB Bi-Directional Serial with USB Type B Connector (Add $45.00) Ethernet Bi-Directional with RJ45 Connector (Add $95.00)